AM Radio Circuits
AM radio began with the first, experimental broadcast on Christmas Eve of 1906 by Canadian experimenter Reginald Fessenden, and was used for small-scale voice and music broadcasts up until World War I. AM radio technology is simpler than Frequency Modulated (FM) radio, Digital Audio Broadcast (DAB), Satellite Radio or HD (digital) Radio. An AM receiver detects amplitude variations in the radio waves at a particular frequency. It then amplifies changes in the signal voltage to drive a loudspeaker or earphones.
The earliest crystal radio receivers used a crystal diode detector with no a
mplification. As a result, many broadcast stations are required as a condition of license to reduce their broadcasting power significantly (or use directional antennas) after sunset, or even to suspend broadcasting entirely during nighttime hours. Medium-wave and short-wave radio signals act differently during daytime and nighttime. However, in the late 1960s and 1970s, top 40 rock and roll stations in the US and Canada such as WABC and CHUM transmitted highly processed and extended audio to 11 kHz, successfully attracting huge audiences. Early experiments with stereo AM radio involved two separate stations (both AM or sometimes one AM and one FM) broadcasting the left and right audio channels.
Because of its susceptibility to atmospheric and electrical interference, AM broadcasting now attracts mainly talk radio and news programming, while music radio and public radio mostly shifted to FM broadcasting in the late 1970s. This system was not very practical, as it required the listener to use two separate radios. Synchronization was problematic, often resulting in "ping-pong" effects between the two channels. Reception was also likely to be different between the two stations, and many listeners used mismatching models of receivers.
