Dual Audio Power Amplifier 6 W × 2 Ch

TA8246AH is dual power amplifier for Consumer applications. This IC provides an output power of 6 watts per channel (at VCC = 20 V, f = 1 kHz, THD = 10%, RL = 8 Ω). It is suitable for power amplifier of TV and home Stereo. 

Circuit diagram:

Dual Audio Power Amplifier 6 W × 2 Ch

6 + 6W STEREO AMPLIFIER WITH MUTE & ST-BY TDA7499

Features:

• WIDE SUPPLY VOLTAGE RANGE UP TO±18V
• 6 + 6W @ THD =10%, RL = 8Ω, VS = +14V
• NO POP AT TURN-ON/OFF
• MUTE (POP FREE)
• STAND-BY FEATURE (LOW Iq)
• SHORT CIRCUIT PROTECTION TO GND
• THERMAL OVERLOAD PROTECTION

Circuit Diagram:

TDA7499 stereo amplifier

2 x 6W CAR RADIO AMPLIFIER PLUS SOLID STATE SWITCH TDA7365

General Description

• OUTPUT POWER 2x6W/4Ω @14.4V, 1KHz, 10%
• SOLID STATE POWER SWITCH INCLUDED (1A @ VDROP = 0.8V Typ.)
• MINIMUM EXTERNAL COMPONENT COUNT
• - INTERNALLY FIXED GAIN (40dB)
• - NO BOOTSTRAP CAPACITORS
• - NO EXTERNAL COMPENSATION
• ST-BY FUNCTION (CMOS COMPATIBLE)
• MUTE FUNCTION (CMOS COMPATIBLE)
• NO AUDIBLE POP DURING MUTE/ST-BY
• OPERATIONS
• LOW SUPPLY SELF MUTING
• PROTECTIONS
• AC AUDIO OUTPUTS SHORT CIRCUIT TO GND
• DC AUDIO OUTPUTS SHORT CIRCUIT TO
• GND AND TO VS AT POWER ON
• SWITCH OUTPUT INTERNAL CURRENT LIMITATION
• OVERRATING CHIP TEMPERATURE WITH
• SOFT THERMAL LIMITER 
• LOAD DUMP
• FORTUITOUS OPEN GND

Circuit diagram:

2 x 6W CAR RADIO AMPLIFIER PLUS SOLID STATE SWITCH

2 x 6 W hi-fi audio power amplifier TDA2615

FEATURES:

• Requires very few external components
• No switch-on/switch-off clicks
• Input mute during switch-on and switch-off
• Low offset voltage between output and ground
• Excellent gain balance of both amplifiers
• Hi-fi in accordance with “IEC 268” and “DIN 45500”
• Short-circuit proof and thermal protected
• Mute possibility.

GENERAL DESCRIPTION:

The TDA2615 is a dual power amplifier in a 9-lead plastic single-in-line (SIL9MPF) medium power package. It has seen especially designed for mains fed applications, such as stereo radio and stereo TV.

Circuit Diagram:

Circuit Diagram 2 x 6 W hi-fi audio power amplifier TDA2615

6 + 6W STEREO AMPLIFIER

TDA2007 6 + 6W STEREO AMPLIFIER

2 x 6 W stereo power amplifier

Description

The TDA1517 is an integrated class-B dual output  amplifier in a plastic single in-line medium power package  with fin (SIL9MPF), a plastic rectangular-bent single in-line  medium power package with fin (RBS9MPF) or a plastic  heat-dissipating dual in-line package (HDIP18). The  device is primarily developed for multi-media applications.

Circuit Diagram

2 x 6 W stereo power amplifier

TDA1519 2 x 6 W stereo car radio power amplifier

GENERAL DESCRIPTION:

The TDA1519 is an integrated class-B dual output amplifier in a 9-lead single in-line (SIL) plastic medium power package. The device is primarily developed for car radio applications.

Features:

• Requires very few external components
• High output power
• Fixed gain
• Good ripple rejection
• Mute/stand-by switch
• Load dump protection
• AC and DC short-circuit-safe to ground and VP
• Thermally protected
• Reverse polarity safe
• Capability to handle high energy on outputs (VP = 0 V)
• No switch-on/switch-off plop
• Protected against electrostatic discharge
• Compatible with TDA1517 (except gain).

Circuit diagram:

TDA1519 2 x 6 W stereo car radio power amplifier

TDA1010A 2 x 6W audio power amplifier

Description:

     The TDA1010A is a monolithic integrated class-B audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is primarily developed as a 6 W car radio amplifier for use with 4Ωand 2Ωload impedances. The wide supply voltage range and the flexibility of the IC make it an attractive proposition for record players and tape recorders with output powers up to 10 W.

Special features:

• single in-line (SIL) construction for easy mounting 
• separated preamplifier and power amplifier 
• high output power 
• low-cost external components 
• good ripple rejection 
• thermal protection 

Reference:

• Supply voltage range Vp...........................6 to 24 V 
• Repetitive peak output current IORM...........max. 3 A 
• Operating ambient temperature Tamb ........−25 to + 150 °C 
• Storage temperature Tstg ........................−55 to + 150 °C 

Circuit diagram:

Tda1010A Circuit Diagram

Tda1010A layout

Tda1010A pcb

    

Datasheet for TDA1010A: Download

Where you can buy: Aliexpress