AmplifierCircuits

Circuit diagram: High Speed Operational Amplifier Datasheet for  LM6161/LM6261/LM6361: Download

General Description: The BA10324A, BA10324AF, and BA10324AFV are monolithic ICs with four built-in operational amplifiers featuring internal phase compensation.  Either a dual or single power supply can be driven, and these products can be driven by a digital system 5V single power supply. These products can be used in a wide range of administrative and industrial applications, including transducer amplifiers and DC amplifiers. Pin connection: Quad ground sense operational amplifier Datasheet for BA10324A, BA10324AF, and BA10324AFV: Download

Dual Operational Amplifiers AN4558 Datasheet for AN4558: Download

  Overview  The AN4250, the AN4250S, and the AN6593 are  single operational amplifiers which can be operated  with very low power consumption. Moreover, they have  wide range (±1V to±18V)of supply voltage, and  electrical characteristics such as power consumption  and input bias current can be programmed according  to the current value set by outer resistor. T hey are suitable for applications to various  electronic circuits such as portable electronic  equipments operated by the battery. Features Wide supply voltage rang (±1V to ±18V) Electrical characteristics programmable by set current Phase compensation circuit built in Output short-circuit protection Offset null Circuit diagram:  Low Power Consumption Operational Amplifiers Pin Datasheet for  AN4250: Download

Features: Low voltage noise: 4.5 nV/√Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion: 0.002% Excellent frequency stability ESD protection 2 kV General Description: The LM833 is a monolithic dual operational  amplifier particularly well-suited to audio applications.  It offers low voltage noise (4.5 nV/√Hz) and high   frequency performances (15 MHz gain bandwidth   product, 7 V/µs slew rate).  In addition, the LM833 has a very low distortion   (0.002%) and excellent phase/gain margins. Circuit Diagram: Low noise dual operational amplifier Datasheet for LM833:   Download

Schematic diagram LM101A Pin connection Datasheet LM101A:   Download

General Description: The NE5532, NE5532A, SA5532, and SA5532A are high-performance operational amplifiers combining excellent  dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and  maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output  short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These  devices have specified maximum limits for equivalent input noise voltage. Circuit Diagram: DUAL LOW-NOISE OPERATIONAL AMPLIFIERS

General Description: The LM12 is a power op amp capable of driving g25V at g10A while operating from g30V supplies. The monolithic IC can deliver 80W of sine wave power into a 4X load with 0.01% distortion. Power bandwidth is 60 kHz. Further, a peak dissipation capability of 800W allows it to handle reactive loads such as transducers, actuators or small motors without derating. The IC delivers g10A output current at any output voltage yet is completely protected against overloads, including shorts to the supplies. The dynamic safe-area protection is provided by instantaneous peak-temperature limiting within the power transistor array The turn-on characteristics are controlled by keeping the output open-circuited until the total supply voltage reaches 14V. The output is also opened as the case temperature exceeds 150§C or as the supply voltage approaches the BVCEO of the output transistors. The IC withstands...

FEATURES MO-127 COPPER POWER DIP™ PACKAGE HIGH INTERNAL POWER DISSIPATION  — 500 watts HIGH VOLTAGE OPERATION — ±75V VERY HIGH CURRENT — ±30 amps INTERNAL SOA PROTECTION OUTPUT SWINGS CLOSE TO SUPPLY RAILS EXTERNAL SHUTDOWN CONTROL APPLICATIONS LINEAR AND ROTARY MOTOR DRIVES YOKE/MAGNETIC FIELD DEFLECTION PROGRAMMABLE POWER SUPPLIES to ±68V TRANSDUCER/AUDIO TO 1000W 1000W equivalent schematic 1000 w ampliifer tipycal applications

Features: HIGH INTERNAL DISSIPATION — 200 WATTS HIGH VOLTAGE, HIGH CURRENT — 200V, 20A HIGH SLEW RATE — 50V/µS 4 WIRE CURRENT LIMIT SENSING LOW DISTORTION EXTERNAL SLEEP MODE CONTROL OPTIONAL BOOST VOLTAGE INPU APPLICATIONS: SONAR TRANSDUCER DRIVER LINEAR AND ROTARY MOTOR DRIVES YOKE/MAGNETIC FIELD EXCITATION PROGRAMMABLE POWER SUPPLIES TO ±95V AUDIO UP TO 400W Circuit Diagram: Equivalent circuit 400 Watt MOSFET Operational Amplifier Pin connection for 400 Watt MOSFET Operational Amplifier

Features high internal dissipation - 250 watts high voltage. high curent - 100V, 30 A high slew rate - 100V/uS 4 wire curent limit sensig low distorsion external shutdown control Description: The PA05 is a high voltage MOSFET power operational amplifier that extends the performance limits of power amplifier  in slew rate and power bandwidth, while maintaining high current and power dissipation ratings.  The PA05 is a highly flexible amplifier. The shutdown control  feature allows the output stage to be turned off for standby operation or load protection during fault conditions. Boost voltage inputs allow the small signal portion of the amplifier to operate at a higher voltage than the high current output stage. The amplifier is then biased to achieve close linear swings to the supply rails at high currents for extra efficient operation.  EQUIVALENT SCHEMATIC: Circuit diagram for 500W MOSFET POWER OPERATIONAL AMPLIFIERS PA...

MO-127 COPPER POWER DIP™ PACKAGE HIGH INTERNAL POWER DISSIPATION 500 watts HIGH VOLTAGE OPERATION — ±75V VERY HIGH CURRENT — ±30 amps INTERNAL SOA PROTECTION OUTPUT SWINGS CLOSE TO SUPPLY RAILS EXTERNAL SHUTDOWN CONTROL Circuit Diagram: 1000W Power Operational Amplifier more details here: Datasheet Download