In whis circuit is designed a simple connection between audio componets.
 |
| Auto Amplifier Wiring Diagram |
from crutchfield.com
Showing posts with label Car Amplifier. Show all posts
Showing posts with label Car Amplifier. Show all posts
10/31/2014
General Description:
The AN7560Z is an audio power IC developed as the sound output of car audio (35 W by 4-ch.). A capacitor and resisitor to stop oscillation are built in between the output pin and GND so that a space saving of set is possible. Also, it incorporates a perfect muting circuit with out shock noise so that a shock noise design under the set transient condition can be made easily when used together with its standby function. In addition, it incorporates various protection circuits to protect the IC from destruction by GND-open-shortcircuit to ground and power supply surge which are the important subject of power IC protection. This IC will largely contribute to a high reliability design of the equipment.
Circuit Diagram:
 |
| 4 x 35 Watt car audio amplifier |
Datasheet for AN7560: Download
10/17/2014
The HA13153A/HA13154A is high output and low distortion 4 ch BTL power IC designed for digital ca raudio. At 13.2 V to 4 Ω load, this power IC provides output power 15 W with 10% distortion.
Circuit Diagram:
 |
| Circuit diagram for 4 x 15 Watt amplifier car audio |
Datasheet for HA13153: Download
8/09/2014
Features
High power capability:
– 40 W/4 max
– 35 W/4 EIAJ
– 45 W/3.2 max
– 40 W/3.2 EIAJ
– 32 W/3.2 @ VS = 14.4 V, f = 1 kHz,
d = 10 %
– 26 W/4 @ VS = 14.4 V, f = 1 kHz,
d = 10 %
DIfferential inputs (either single ended or
differential input signal are accepted)
Minimum external component count:
– No bootstrap capacitors
– No Boucherot cells
– Internally fixed gain (30 dB)
– No SVR Capacitor
Standby function (CMOS compatible)
Programmable turn-on/off delay
No audible pop during mute and standby
operations
Protections:
– Short circuit (to GND, to VS, across the
load)
– Very inductive loads
– Chip over temperature
– Load dump
– Open GND
– ESD
Description
The TDA7391 is a bridge class AB audio power amplifier specially intended for car radio high power applications. The high power capability together with the possibility to operate either in differential input mode or single ended input mode makes it suitable for boosters and high end car radio equipments. The exclusive fully complementary output stage and the internal fixed gain configuration drop the external component count.The on board clipping detector allows easy implementation of gain compression systems.
Circuit Diagram
 |
| 35 W bridge car radio amplifier circuit diagram |
PCB layout:
 |
| 35 W bridge car radio amplifier layout pcb |
Features
High output power capability:
2 x 40 W max./ 4
2 x 35 W/4 EIAJ
2 x 25 W/4 (14.4 V, 1 kHz, 10 %)
2 x 25 W/ 2 (14.4 V, 1 kHz, 10 %)
Differential inputs
Minimum external components count
Internally fixed gain (26 db)
Mute function (cmos compatible)
Automute at minimum supply voltage detection
Standby function
No audible pop during mute and standby operations
Clipping detector with programmable distortion threshold
short circuit (out to ground, out to supply voltage, across the load)
overrating chip temperature with soft thermal limiter
load dump voltage
fortuitous open ground
loudspeaker dc current
ESD
Description
High output power capability:
2 x 40 W max./ 4
2 x 35 W/4 EIAJ
2 x 25 W/4 (14.4 V, 1 kHz, 10 %)
2 x 25 W/ 2 (14.4 V, 1 kHz, 10 %)
Differential inputs
Minimum external components count
Internally fixed gain (26 db)
Mute function (cmos compatible)
Automute at minimum supply voltage detection
Standby function
No audible pop during mute and standby operations
Clipping detector with programmable distortion threshold
short circuit (out to ground, out to supply voltage, across the load)
overrating chip temperature with soft thermal limiter
load dump voltage
fortuitous open ground
loudspeaker dc current
ESD
Description
The TDA7376B is a new technology dual bridge audio amplifier in Multiwatt 15 package designed for car radio applications. Thanks to the fully complementary PNP/NPN output stage configuration the TDA7376B delivers a rail-to-rail voltage swing with no need of bootstrap capacitors. Differential input pairs, that will accept either single ended or differential input signals, guarantee high noise immunity making the device suitable for both car radio and car boosters applications.The audio mute control, that attenuates the output signal of the audio amplifiers, suppresses pop On - Off transients and cuts any noises coming from previous stages. The standby control, that de-biases the amplifiers, reduces the cost of the power switch. The on-board programmable distortion detector allows compression facility whenever the amplifier is over driven, so limiting the distortion at any levels inside the presettable range.
Circuit diagram:
 |
| 2 x 35 W Power amplifier for car radio |
PCB layout
 |
| pcb layout for TDA7376B Power amplifier for car radio |
7/22/2014
General Description:
The TDA7386 is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed
for high end car radio applications. Based on a fully complementary PNP/NPN configuration, the TDA7386 allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extremely reduced boundary components count allows very compact sets.
Circuit Diagram:
 |
| 4 x 49 W quad bridge car radio amplifier |
General description:
The TDA7381 is a class AB audio power amplifier in Flexiwatt25 package designed for car radio applications. Thanks to the fully complementary PNP/NPN output configuration the TDA7381 allows a rail to rail output voltage swing with no need of bootstrap capacitors.
Features:
- 4 x 30 W/4 max.
- 4 x 25 W/4 EIAJ
- 4 x 18 W/4 @ 14.4 V, 1 kHz, 10 %
- 4 x 15 W/4 @ 13.2 V, 1 kHz, 10 %
- Clipping detector
- Low distortion
- Low output noise
- Standby function
- Mute function
- Automute at min. supply voltage detection
- Clipping
- Out to GND short
- Out to VS short
- Thermal shutdown
- Internally fixed gain (26 dB)
- No external compensation
- No bootstrap capacitors
- Output short circuit to GND, to VS, across the load
- Very inductive loads
- Overrating chip temperature with soft
- thermal limiter
Circuit diagram:
 |
| 4x25 W quad bridge car radio amplifier |
4/17/2014
Circuit Description
IC TA8210AH By using this you can apply a series of audio power amplifier is the car audio system. In general, all the speakers in the car using a subwoofer speaker, and woofer. Because the car is not big room so the sound is being required is not too high. Audio amplifier circuit can work at a minimum voltage 12-volt DC, if supplied under voltage 12-voltamplifier work will be less than the maximum. This amplifier output power up to 200W or 2 x 100W stereo with 8 ohm impedance.
Circuit Diagram
 |
| 200 Watt Stereo Car Amplifier |
Part List :
Resistor
R1 =1K
R2 =50K trim
R3 =1K
R4 =50K trim
R5 =680R
R6 =680R
R7 =150K
R8 =2R2
R9 =2R2
R10=2R2
R11=2R2
C1 =1uF
C2 =1uF
C3 =47uF
C4 =47uF
C5 =100n/400V
C6 =220uF
C7 =220uF
C8 =100n/400V
C9 =100n/400V
C10=100n/400V
IC1=TA8210AH
X2-3=in R
X2-2=gnd
X2-1=in L
X1-1,X1-2=Out R
X1-3,X1-4=Out L
R1 =1K
R2 =50K trim
R3 =1K
R4 =50K trim
R5 =680R
R6 =680R
R7 =150K
R8 =2R2
R9 =2R2
R10=2R2
R11=2R2
Capacitor
C1 =1uF
C2 =1uF
C3 =47uF
C4 =47uF
C5 =100n/400V
C6 =220uF
C7 =220uF
C8 =100n/400V
C9 =100n/400V
C10=100n/400V
Intregated Circuit
IC1=TA8210AH
Connector
X2-3=in R
X2-2=gnd
X2-1=in L
X1-1,X1-2=Out R
X1-3,X1-4=Out L
Subscribe to:
Posts (Atom)
200W Audio Amplifier Circuit
Circuit description: Connecting two TDA2030 thru cheap power transistors we can create a amplifier wich can deliver a higher power. Wi...
