Skip to main content

One Chip AM/FM Radio with Audio Power Amplifier

Description:
The integrated circuit TDA1083 includes, with exception of the FM front end, a complete AM-/FM-radio-circuit with audio power amplifier. An internal Z-diode stabilizes the supply voltage at VS 13 V, which allows with the aid of a resistor and a rectifier, the circuit to be driven by a higher external supply voltage.

Features:
  • Large supply voltage range VS = 3 to 12 V
  • High AM-Sensitivity
  • Limiting threshold voltage Vi = 50 V
  • Audio output power P0 = 0.7 W
  • AFC-connection for VHF-tuner
  • AM-FM switching without high frequency voltages

Applications:
  • AM-/FM- and audio-amplifier
Circuit Diagram:
Circuit diagram for One Chip AM/FM Radio with Audio Power Amplifier

Datasheet for TDA1083: Download

Labels

Labels:

Comments

  1. lucifer11/07/2021 02:29:00 AM

    Such a nice post.#Thanks for sharing this kind of information audio-amplifier-pro-crack You can also visit my Website ukcrack.com

    ReplyDelete
  2. Anonymous3/12/2022 06:21:00 PM

    One Chip Am/Fm Radio With Audio Power Amplifier >>>>> Download Now

    >>>>> Download Full

    One Chip Am/Fm Radio With Audio Power Amplifier >>>>> Download LINK

    >>>>> Download Now

    One Chip Am/Fm Radio With Audio Power Amplifier >>>>> Download Full

    >>>>> Download LINK

    ReplyDelete

Post a Comment

Popular posts from this blog

2 x 15 W stereo Bridge Tied Load (BTL) audio amplifier

General description: The TDA8946J is a dual-channel audio power amplifier with an output power of 2 × 15 W at an 8 Ω load and a 18 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute logic. The TDA8946J comes in a 17-pin DIL-bent-SIL (DBS) power package. The TDA8946J is printed-circuit board (PCB) compatible with all other types in the TDA894x family. One PCB footprint accommodates both the mono and the stereo products. Features: Few external components Fixed gain Standby and mute mode No on/off switching plops Low standby current High supply voltage ripple rejection Outputs short-circuit protected to ground, supply and across the load Thermally protected Printed-circuit board compatible Circuit Diagram: Circuit Diagram for 2 x 15 W stereo Bridge Tied Load (BTL) audio amplifier PCB layout: PCB layout TDA8946 Datasheet for TDA8946J:   Download
Post a Comment
Read more

200W Hybrid Audio Amplifier Circuit

200W Hybrid Audio Amplifier Circuit - c onnecting two TDA2030 thru cheap power transistors we can create a amplifier wich can deliver a higher power. With the components value from the schematic the total amplifier gain is 32 dB. The speaker can be 2 ohm instead of 4 ohm if we use the TIP transistors. TDA 2030 is produced by SGS Ates and is a complete audio amplifier. AB class of the final amplifier cand deliver up to 14W on 4 ohm at a +-14V power supply. With a proper designed power supply this audio amplifier can output 200W. Active components: IC1, Ic2 TDA 2030 T1, T3 = BD 250, TIP 36 T2,T4 = BD 249, TIP 35 D1 … D4 = 1N4001 200W Hybrid Audio Amplifier Circuit
2 comments
Read more