TDA8922 Audio Amplifier 2 x 25W

TDA8922 general description:

The TDA8922 is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 × 25 W. The device is available in the HSOP24 power package with a small internal heatsink and in the DBS23P through-hole power package. Depending on the supply voltage and load conditions, a very small or even no external heatsink is required. The amplifier operates over a wide supply voltage range from ±12.5 to ±30 V and

consumes a very low quiescent current. TDA8922 Audio Amplifier 2 x 25W

TDA8922 features:

• High efficiency (∼90%)
• Operating supply voltage from ±12.5 to ±30 V
• Very low quiescent current
• Low distortion
• Usable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Tied Load (BTL)
•  Fixed gain of 30 dB in Single-Ended (SE) and 36 dB in Bridge-Tied Load (BTL)
• High output power
• Good ripple rejection
• Internal switching frequency can be overruled by an external clock
• No switch-on or switch-off plop noise
• Short-circuit proof across load and to supply lines
• Electrostatic discharge protection
• Thermally protected.

TDA8922 aplications:

• Television sets
• Home-sound sets
• Multimedia systems
• All mains fed audio systems
• Car audio (boosters).

TDA8922 circuit:

Circuit diagram TDA8922 Audio Amplifier 2 x 25W

TDA8922 layout and pcb:

pcb layout TDA8922 Audio Amplifier 2 x 25W

TDA8922 datasheet:

LM386N Audio Power Amplifer Amplifier 1x2W

LM386N general description:

The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value up to 200. The inputs are ground referenced while the output is automatically biased to one half the supply voltage. The quiescent power drain is only 24 milliwatts when operating from a 6 volt supply, making the LM386 ideal for battery operation. LM386N Audio Amplifier 1x2W

LM386N features:

• Battery operation
• Minimum external parts
• Wide supply voltage range: 4V–12V or 5V–18V
• Low quiescent current drain: 4mA
• Voltage gains from 20 to 200
• Ground referenced input
• Self-centering output quiescent voltage
• Low distortion: 0.2% (AV = 20, VS = 6V, RL = 8Ω, PO =
• 125mW, f = 1kHz)
• n Available in 8 pin MSOP package

LM386N circuit diagram:

LM386N Audio Amplifier 1x2W

LM386N layout:

LM386N pcb layout

LM386N pin layout:

LM386N pin layout:

TA8210AH Audio Amplifier 2x22W

TA8210AH general description:

     It's amizing circuit work beautiful. Is desination for audio amplification, for car. This is a circuit of 2 x 22 watt BTL amplifier using IC TA8210AH. It is not only an auto amplifier, ideal for a low-frequency auditory approach those hi-fi, with a very good linear feature. Can be fueled by a 12 volt car battery but shi from a 12 volt charger. The chip incorporates four bridge amplifiers available in two by two in order to ensure the output 22 watts per channel on 4 ohms. TA8210AH Audio Amplifier 2x22W

TA8210AH features:

• Peak supply voltage (0.2s): 50 V
• supply voltage VCC (DC): 25 V
• Operating supply voltage VCC (opr): 18 V
• Output current (peak): 9 A
• Power dissipation PD: 50 W
• Operating temperature: 30~85 °C
• Storage temperature: 55~150 °C

TA8210AH circuit diagram:

TA8210AH Audio Amplifier 2x22W

TA8210AH layout:

Layout TA8210AH Audio Amplifier 2x22W

PCB TA8210AH Audio Amplifier 2x22W

22W x 4 Channel Audio Amplifier Circuit Diagram TA8255AH

22W x 4 Channel Audio Amplifier Circuit Diagram TA8255AH

7.3W x 2CH audio amplifier ic

7.3W x 2CH audio amplifier ic

30 Watt x 2 CH AUDIO POWER AMPLIFER

TA8233H Circuit Diagram

Circuit diagram for 30 Watt x 2 CH AUDIO POWER AMPLIFER

5W mono audio amplifier

The TDA7056B is a mono Bridge-Tied Load (BTL) output amplifier with DC volume control. It is designed for use in TV and monitors, but is also suitable for battery-fed portable recorders and radios. The device is contained in a 9-pin medium power package.

Circuit Diagram:

5W mono audio amplifier

4 x 11 W or 2 x 22 W power amplifier

General Description:

The TDA1554Q is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) plastic power package.The circuit contains 4 x 11 W single-ended or 2 x 22 W bridge amplifiers. The device is primarily developed for car radio applications.

Circuit Diagram:

circuit diagram 2 x 22 W audio power amplifier

circuit diagram 4 x 11 W audio power amplifier

Datasheet for TDA1554Q: Download

Dual Audio Power Amplifier

General Description:

The TA8211AH is dual audio power amplifier for consumer applications.  This IC provides an output power of 6 watts per channel  (at VCC = 20 V, f = 1 kHz, THD = 10%, RL = 8 Ω). 

It is suitable for power amplifier of TV and home stereo. 

Features:

• High output power: Pout = 6 W/channel (Typ.) 
•  (VCC = 20 V, RL = 8 Ω, f = 1 kHz, THD = 10%) 
• Low noise: Vno = 0.14 mVrms (Typ.) 
•  (VCC = 28 V, RL = 8 Ω, GV = 34dB, Rg = 10 kΩ, 
•  BW = 20 Hz~20 kHz) 
• Very few external parts 
• Built in thermal shut down protector circuit 
• Operating supply voltage range: VCC (opr) = 10~30 V (Ta = 25°C) 

Circuit Diagram:

Circuit diagram for Dual Audio Power Amplifier 

Audio Power Amplifier 5.8W

General Description:

The NTE1285 and NTE1286 are audio power amplifiers in a 7–Lead SIP type package designed especially for car radio and car stereo applications. These devices are encapsulated in newly developed small packages featuring low thermal resistance, providing easy design for 2Ω. At 14.4V the devices give output power of 7W with RL = 4Ω and 11W with RL = 2Ω.

Features:

High Output Power

Low Transient Noise at Power Supplu Switch ON

Mirror Image Pin Configurations

Protection Circuits are Provided for the Following:

Load Dump Protection

Thermal Shut–Down Protection

Overvoltage Protection

Output Terminal Short–Circuit Protection

Pinout:

Audio Power Amplifier 5.8W

60 W Quad Half-Bridge Digital Amplifier

General Description:

The CS44130 is a high-efficiency power stage for digital Class-D amplifiers designed to recieve PWM signals from a modulator such as the CS44800/600. The power stage outputs can be configured as four half-bridge channels, two half-bridge channels and one full-bridge channel, two full-bridge channels, or one parallel full-bridge channel.

Features:

 Configurable Outputs (10% THD+N)

– 2 x 30 W into 8 Ω, Full-Bridge

– 1 x 60 W into 4 Ω, Parallel Full-Bridge

– 4 x 15 W into 4 Ω, Half-Bridge

– 2 x 15 W into 4 Ω, Half-Bridge + 1 x 30 W 

into 8 Ω, Full-Bridge

 Space-Efficient, Thermally-Enhanced QFN 

Package

 PWM Popguard® Technology for Quiet Startup

 > 100 dB Dynamic Range - System Level

 < 0.12% THD+N @ 1 W - System Level

 Built-In Protection with Error Reporting

– Over-Current

– Thermal Warning

– Thermal Fault

– Under-Voltage

 Single (+10.8 V to +21 V) High Voltage Supply

 High Efficiency (90%)

 Low RDS(ON)

 Low Quiescent Current

 Low Power Standby Mode

Common Applications

 Digital Televisions

 MP3 Docking Stations

 Mini Shelf Systems

 Networked Audio/POE Systems

 Desktop Speakers

Circuit Diagram:

60 W Quad Half-Bridge Digital Amplifier

Datasheet for CS44130: Download

47 Watt 4-channel Audio Power Circuit Diagram

Overview:

The TB2903HQ is 4-ch BTL audio amplifier for car audio applications. This IC can generate higher power: POUT MAX = 47 W as it includes the pure complementary P-ch and N-ch DMOS output stage. It is designed to yield low distortion ratio for 4-ch BTL audio power amplifier, built-in standby function, muting function, and various kinds of protectors. Additionally, Off-set detector is built in. 

Features 

• High power output 
• POUT MAX (1) = 47 W (typ.) 
• VCC = 14.4 V, f = 1 kHz, JEITA max, RL = 4 Ω) 
• Built-in standby switch function (pin 4) 
• Built-in muting function (pin 22) 
• Built-in Off-set detection function (pin 25) 
• Thermal shut down, overvoltage, out to GND, out to VCC, out to out short 
• Operating supply voltage: VCC (opr) = 9~18 V (RL = 4 Ω) 

Circuit Diagam:

47 Watt 4-channel Audio Power Circuit Diagram

Datasheet for  TB2903HQ: Download

18W+18W Stereo Amplifier

General Description:

The TDA7265SA is class AB Dual Audio Power amplifier assembled in the @ Clipwatt 11 package, specially designed for high quality sound application as Hi-Fi music centers and stereo TV sets. The TDA7265SA is pin to pin compatible with TDA7269, TDA7269A, TDA7269SA, TDA7265,TDA7499, TDA7499SA. 

Circiut Diagram:

18W+18W Stereo Amplifier

5.4W Dual Audio Power Amplifier

General Description:

The BA5415A and BA5416 are dual power amplifier ICs that operate off a 9V to 15V supply. When driving a 4Ω load off a 9V supply, the BA5415A does not require a heatsink. The BA5416 uses a lost-cost package. The basic characteristics (total harmonic distortion etc.) of the amplifiers are excellent, and both ICs include a standby switch function.

Features

• High output.
• POUT = 5.4W (VCC = 12V, RL = 3Ω and THD = 10%)
• POUT = 2.5W (VCC = 9V, RL = 4Ω and THD = 10%)
• Excellent audio quality.
• THD = 0.1% (f = 1kHz, PO = 0.5W)
• VNO = 0.3mVrms (Rg = 10kΩ)
• RR = 60dB (fRR = 100Hz)
• Wide operating power supply voltage range.
• VCC = 5.0V to 18.0V (BA5416 : 5.0V to 15.0V)
• Switching noise (ìpopî noise) generated when the power is switched on and off is small.
• Ripple mixing when motor starts has been prevented.
• Built-in thermal shutout.
• Built-in standby switch.
• Output is not influenced by the standby pin voltage.
• Mute time does not depend on VCC.
• Soft clipping.
• Heatsink not required  (for BA5415A, with VCC = 9V and RL ≥ 4Ω).

Circuit Diagram:

5.4W Dual Audio Power Amplifier

Datasheet for BA5415A: Download

1W Per Channel Stereo Class-D Audio Power Amplifier

Features

• 1 watt per channel with 8-ohm load
• Max. efficiency » 80% with 8-ohm load at 5 volts
• Filterless
• Digital gain control
• Build-in depop circuitry
• Error protection for short circuit and over-temperature
• Mute (shutdown) current < 1µA typical
• Low operating current (4mA at 5 volts without load)
• TSSOP 24L package available 

General Description

The AP130 is an oversampling class-D power amplifier for  stereo audio applications. It provides high power-efficiency for filterless 8-ohm load. Build-in depop, mute and gain control features simplify the applications. BTL (Bridge-Tied-Load) configuration delivers up to 1 watt into 8-ohm load per channel at 5-V supply voltage. It allows direct coupling of the power signal. Reliability is

improved through over-temperature and short circuit protections. The class-D power amplifier enables high efficiency applications for portable devices.

Circuit Diagram

1W Per Channel Stereo Class-D Audio Power Amplifier

70W x 1ch BTL Power Amplifier

Circuit diagram for AN17850A:

70W x 1ch BTL Power Amplifier

Audio signal processing 1 W × 2-channel

Overview:

AN12942B is an one-chip IC for the stereo speakers which can output 1 W by 8 Ω, headphone amplifiers, line amplifiers, and electronic volumes. The AGC circuit is built-in to prevent the resonance or the vibration by the speaker’s energy and the clipping distortion what is  called "broken up sound".  Also the AN12942B is built-in power saving on/off function automatically detecting input signal to save the power of speaker  amplifier.

Circuit Diagram:

Audio signal processing

Audio power IC for mp3 Player

Overview:

The AN12941A is an amplifier IC for stereo  speakers which can output 1 W by 8 Ω or 2 W by 4 Ω. The AGC circuit is built-in to prevent the resonance  or the vibration by the speaker's energy and the  clipping distortion what is called "broken up sound."  of the speakers. Also, to reduce power consumption, AN12941A  has a built-in function which automatically detects the  input signal and can automatically enter power save  mode when there is no signal.

Features:

• Speaker amplifier is
• 1 W × 2-channel: 8 Ω, VCC = 5 V or
• 2 W × 2-channel: 4 Ω, VCC = 5 V
• Built-in AGC circuit
•  Prevention of the resonance or the vibration by 
• the speaker's energy and the clipping distortion 
• of the speaker by AGC at excessive input signal 
• (with AGC on/off switch).
• Built-in automatic power saving function
•  It detects input signals and switches on/off (with 
• the on/off switch for the automatic power saving).
• Operating supply voltage: VCC 3.0 V to 5.5 V/ 
• VCC_SP 3.0 V to 5.5 V

Circuit Diagram:

Audio power IC for mp3 Player

Auto Radio Amplifier Circuit

„ Features

• Dual 10 W audio power amplifier
• Built-in muting circuit
• Incorporating protection circuit
• Low frequency amplifier
• SIL-12 pin plastic package (Power-type with fin)

Circuit Diagram:

Auto Radio Amplifier Circuit

Stereo 50W Audio Power Amplifier

FEATURES DESCRIPTION

The LM4732 is a stereo audio amplifier capable of 2 typically delivering 50W per channel of

continuous The LM4732 has short circuit protection and a APPLICATIONS thermal shut down feature that is activated when the  The LM4732 also has an under voltage lock out feature for click and Each amplifier of the LM4732 has an independent KEY SPECIFICATIONS The LM4732 has a wide operating supply range from +/-10V - +/-40V allowing for lower cost unregulated power supplies to be used.

Features:

• Mute Attenuation 110dB (typ)

• PSRR 89dB (typ)

• Slew Rate 19V/μs (typ)

• Low External Component Count

• Quiet Fade-in/out Mute Mode average output power into a 4Ω or 8Ω load with less

• Wide Supply Range: 20V - 80V than 10% THD+N from 20Hz - 20kHz.

• Audio Amplifier for Component Stereo die temperature exceeds 150°C.

• Audio Amplifier for Self-powered Speakers

• Output Power/Channel at 10% THD+N, 1kHz 

• Audio Amplifier for Compact Stereo pop free power on and off.

• Audio Amplifier for High-end and HD TVs smooth transition fade-in/out mute.

• THD+N at 2 x 1W into 8Ω, 1kHz 0.01% (typ) bridge or parallel operation for 100W mono solutions.

Circuit Diagram:

Stereo 50W Audio Power Amplifier