TDA7490 Audio Amplifier 2x25W

TDA7490 general description:

The TDA7490 is a dual audio class D amplifier assembled in Flexiwatt 25 package; it is specially designed for high efficiency application mainly for TV and Home Stereo sets.

TDA7490 features: 

• 25W + 25W OUTPUT POWER:
• RL = 8Ω/4Ω; THD = 10%
• HIGH EFFICIENCY
• WIDE SUPPLY VOLTAGE RANGE (FROM
• ±10 TO ±25V)
• SPLIT SUPPLY
• TURN OFF/ON POP FREE
• ST-BY AND MUTE FEATURES
• SHORT CIRCUIT PROTECTION ACROSS
• THE LOAD
• THERMAL OVERLOAD PROTECTION
• EXTERNALLY SINCHRONIZABLE
• BRIDGE CONFIGURATION

TDA7490 amplifier diagram, circuits:

TDA7490 Audio Amplifier 2x25W

TDA7490 layout, pcb:

TDA7490 layout, pcb

TDA7490 layout, pcb

TDA1015 Audio Amplifier 1x4W

TDA1015 general description:

The TDA1015 is a monolithic integrated audio amplifier circuit in a 9-lead single in-line (SIL) plastic package. The device is especially designed for portable radio and recorder applications and delivers up to 4 W in a 4Ω load impedance. The very low applicable supply voltage of 3,6 V permits 6 V spplications.

TDA1015 features:

• single in-line (SIL) construction for easy mounting
• separated preamplifier and power amplifier
• high output power
• thermal protection
• high input impedance
• low current drain
• limited noise behaviour at radio frequencies

TDA1015 reference data:

• Supply voltage range VP 3,6 to 18 V
• Peak output current IOM max. 2,5 A
• Output power at dtot= 10%
• VP = 12 V; RL = 4 Ω Po typ. 4,2 W
• VP = 9 V; RL = 4 Ω Po typ. 2,3 W
• VP = 6 V; RL = 4 Ω Po typ. 1,0 W
• Total harmonic distortion at Po = 1 W; RL = 4 Ω dtot typ. 0,3 %
• Input impedance preamplifier (pin 8) |Zi | > 100 kΩ power amplifier (pin 6) |Zi| typ. 20 kΩ
• Total quiescent current Itot typ. 14 mA
• Operating ambient temperature Tamb −25 to + 150 °C
• Storage temperature Tstg −55 to + 150 °C

TDA1015 circuit diagram:

Circuit diagram TDA1015 Audio Amplifier 1x4W

TDA7490 Audio Amplifier 2 x 25W / 1 x 50W

TDA7490 general description:

The TDA7490 is a dual audio class D amplifier assembled in Flexiwatt 25 package; it is specially designed for high efficiency application mainly for TV and Home Stereo sets.  TDA7490 Audio Amplifier 2 x 25W / 1 x 50W

TDA7490 features:

• 25W + 25W OUTPUT POWER:
• RL = 8Ω/4Ω; THD = 10%
• HIGH EFFICIENCY
• WIDE SUPPLY VOLTAGE RANGE (FROM
• ±10 TO ±25V)
• SPLIT SUPPLY
• TURN OFF/ON POP FREE
• ST-BY AND MUTE FEATURES
• SHORT CIRCUIT PROTECTION ACROSS
• THE LOAD
• THERMAL OVERLOAD PROTECTION
• EXTERNALLY SINCHRONIZABLE
• BRIDGE CONFIGURATION

TDA7490 sterio circuit diagram:

TDA7490 Audio Amplifier 2 x 25W / 1 x 50W circuit diagram

TDA7490 mono circuit diagram:

TDA7490 Audio Amplifier 2 x 25W / 1 x 50W mono circuit diagram

TDA7490 sterio circuit pcb:

TDA 7490 pcb layout 

TDA7560 Audio Amplifier 4x50W

TDA7560 general description:

TDA7560 is a 4 x 45W QUAD BRIDGE car audio amplifier plus HSD. The TDA7560’s inputs are ground-compatible and can stand very high input signals (± 8Vpk) without any performances degradation. If the standard value for the input capacitors (0.1mF) is adopted, the low frequency cut-off will amount to 16 Hz. The TDA7560 is a breakthrough BCD (Bipolar / CMOS / DMOS) technology class AB Audio Power Amplifierin Flexiwatt 25 package designed for high power car radio. The fully complementary P-Channel/N-Channel output structure allows a rail to rail output voltage swing which, combined with high output current and minimised saturation losses sets new power references in the car-radio field, with unparalleled distortion performances.

TDA7560 features:

• 4 x 50W/4W MAX.
• 4 x 45W/4W EIAJ
• 4 x 30W/4W @ 14.4V, 1KHz, 10%
• 4 x 80W/2W MAX.
• 4 x 77W/2W EIAJ
• 4 x 55W/2W @ 14.4V, 1KHz, 10%
• EXCELLENT 2W DRIVING CAPABILITY
• HI-FI CLASS DISTORTION
• LOW OUTPUT NOISE

TDA7560 amplifier circuit diagram:

TDA7560 Audio Amplifier 4x50W

TDA7560 layout:

pcb layout for TDA7560 Audio Amplifier 4x50W

pcb layout TDA7560 Audio Amplifier 4x50W

40W hi-fi audio power amplifier TDA2051

Features for TDA2051:

• HIGH OUTPUT POWER (60W/4Ω MUSIC POWER IEC 268.3 RULES)
• HIGH OPERATING SUPPLY VOLTAGE (±25V)
• SINGLE OR SPLIT SUPPLY OPERATIONS
• VERY LOW DISTORTION
• SHORT CIRCUIT PROTECTION (OUT TO GND)
• THERMAL SHUTDOWN

Circuit Diagram:

Cicuit diagram for 40W hi-fi audio power amplifier TDA2051

Datasheet for TDA2051: Download

2 × 40 W/2 Ω stereo BTL car radio power amplifier

FEATURES:

• Requires very few external components
• High output power
• 4 Ω and 2 Ω load impedance
• Low output offset voltage
• Fixed gain
• Diagnostic facility (distortion, short-circuit and temperature detection)
• Good ripple rejection
• Mode select switch (operating, mute and standby)
• Load dump protection
• Short-circuit safe to ground, to VP and across the load
• Low power dissipation in any short-circuit condition
• Thermally protected
• Reverse polarity safe
• Electrostatic discharge protection
• No switch-on/switch-off plop
• Flexible leads
• Low thermal resistance.

GENERAL DESCRIPTION:

The TDA8563AQ is an integrated class-B output amplifier in a 13-lead single-in-line (SIL) power package. It contains 2 × 40 W/2 Ω amplifiers in BTL configuration. The device is primarily developed for car radio applications.

Circuit Diagram:

2 × 40 W/2 Ω stereo BTL car radio power amplifier

High Efficiency Power Amplifier 2 x 30W into 8Ω or 1 x 60W into 4 Ω

GENERAL DESCRIPTION

The DDX-2050 power device is a monolithic dual channel H-Bridge that can provide up to 30 watts 

per channel of audio power at very high efficiency. The DDX-2050 power device  contains a logic interface, integrated bridge  drivers, high efficiency MOSFET output  transistors and protection circuitry. The device  may be used as a dual bridge or reconfigured as  a single bridge with double the output current  capability.  The benefits of the DDX amplification system are  an all-digital design that eliminates the need for a  digital to analog converter (DAC) and the high  efficiency operation derived from the use of  Apogee's patented damped ternary pulse width  modulation (PWM). This approach provides an  efficiency advantage over conventional Class-D  designs and up to three times the efficiency of  typical Class A/B amplifiers with music input  signals.

Mono High Efficiency Power Amplifier 60 Watt

Stereo High Efficiency Power Amplifier 2 x 30 Watt

STEREO 25W (4Ω) CLASS-T™ DIGITAL AUDIO AMPLIFIER

General Description:
The TA2021B is a 25W (4Ω) continuous average per channel Class-T Digital Audio Power Amplifier IC using Tripath’s proprietary Digital Power Processing (DPPTM) technology. Class-T amplifiers offer both the audio fidelity of Class-AB and the power efficiency of Class-D amplifiers.

Applications 

• DVD Receivers 
• Mini/Micro Component Systems 
• Computer / PC Multimedia 
• Cable Set-Top Products 
• Televisions 
• Battery Powered Systems

Features:

• Class-T architecture 
• Single Supply Operation 
• “Audiophile” Quality Sound 
• 0.05% THD+N @ 13W 4Ω
• 0.1% THD+N @15.5W 4Ω
• 0.1% IHF-IM @ 1W 4Ω
• High Power 
• 25W @ 4Ω, 10% THD+N, VDD=14.6V 
• 23.5W @ 4Ω, 10% THD+N, VDD=14.2V 
• 14W @ 8Ω, 10% THD+N, VDD=14.2V 
• High Efficiency 
• 88% @ 13.5W 8Ω
• 81% @ 25W 4Ω
• Dynamic Range = 100 dB 
• Mute and Sleep inputs 
• Turn-on & turn-off pop suppression 
• Over-current protection 
• Over-temperature protection 
• Bridged outputs 
• 36-pin PSOP “Slug-Up” package 

Circuit Diagram:

STEREO 25W (4Ω) CLASS-T™ DIGITAL AUDIO AMPLIFIER

100W Audio Power Amplifier with Mute

General Description:

The LM4732 is a stereo audio amplifier capable of typically delivering 50W per channel of continuous average output power into a 4Ω or 8Ω load with less than 10% THD+N from 20Hz - 20kHz. The LM4732 has short circuit protection and a thermal shut down feature that is activated when the die temperature exceeds 150˚C. The LM4732 also has an under voltage lock out feature for click and pop free power on and off. Each amplifier of the LM4732 has an independent smooth transition fade-in/out mute. The LM4732 has a wide operating supply range from +/-10V - +/-40V allowing for lower cost unregulated power supplies to be used. The LM4732 amplifiers can easily be configured for bridge or parallel operation for 100W mono solutions.

Circuit Diagram:

100W Audio Power Amplifier with Mute

1W 2W Audio power IC for notebook PC

General Description:

The AN12941A is an amplifier IC for stereo speakers which can output 1 W by 8 Ω or 2 W by 4 Ω. The AGC circuit is built-in to prevent the resonance or the vibration by the speaker's energy and the clipping distortion what is called "broken up sound." of the speakers. Also, to reduce power consumption, AN12941A has a built-in function which automatically detects the 
input signal and can automatically enter power save mode when there is no signal. 

Features:

•  Speaker amplifier is
• 1 W × 2-channel: 8 Ω, VCC = 5 V or
• 2 W × 2-channel: 4 Ω, VCC = 5 V
•  Built-in AGC circuit
•  Prevention of the resonance or the vibration by 
• the speaker's energy and the clipping distortion 
• of the speaker by AGC at excessive input signal 
• (with AGC on/off switch).
•  Built-in automatic power saving function
•  It detects input signals and switches on/off (with 
• the on/off switch for the automatic power saving).
•  Operating supply voltage: VCC 3.0 V to 5.5 V/ 
• VCC_SP 3.0 V to 5.5 V

Circuit Diagram:

1W 2W Audio power IC for notebook PC

70 Watt MOSFET Audio Power Amplifier

General Description:

Amplifier’s efficiency is 70%, distortions at cut frequency were at most 0.2% at 20Hz on 8 Ω and 10W. With a power supply of ± 30V the mosfet audio amplifier can deliver 45W on 8 Ω and 70w on 4 Ω. Remember that this audio amplifier is not protected on shortcircuits so everytime you switch on check to see if the speaker is connected.

Circuit Diagram:

70W mosfet power amp irf9530 irf530

4 x 45W Audio Power Amplifier

General description:

The TDA8595 is a complementary quad Bridge Tied Load (BTL) audio power amplifier made in BCDMOS technology. It contains four independent amplifiers in BTL configuration. Through the I2C-bus, diagnosis of temperature warning and clipping level is fully programmable and the information available via two diagnostic pins is selectable. The status of each amplifier (output offset, load or no load, short-circuit or speaker incorrectly connected) can be read separately.

Features and benefits:

• Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant)
• Three hardware-programmable I2C-bus addresses
• Drive 4  or 2  loads
• Speaker fault detection
• Independent short-circuit protection per channel
• Loss of ground and open VP safe (with 150 m series impedance and a supply  decoupling capacitor of 2200 F maximum)
• All outputs short-circuit proof to ground, supply voltage and across the load
• All pins short-circuit proof to ground
• Temperature-controlled gain reduction to prevent audio holes at high junction temperatures
• Low battery voltage detection
• Offset detection
• This part has been qualified in accordance with AEC-Q100

Circuit Diagram:

Circuit Diagram for 4 x 45W Audio Power Amplifier

Datasheet for TDA8595: Download

2 x 210 W audio power amplifier Class-D

General description:

The TDA8954 is a stereo or mono high-efficiency Class D audio power amplifier in a  single IC featuring low power dissipation. It is designed to deliver up to 2 × 210 W into a 4 Ω load in a stereo Single-Ended (SE) application, or 1 × 420 W into an 8 Ω load in a mono Bridge-Tied Load (BTL) application. It combines the benefits of Class D efficiency (≈93 % into a 4 Ω load) with audiophile sound quality comparable to that associated with Class AB amplification. The amplifier operates over a wide supply voltage range from ±12.5 V to ±42.5 V and  features low quiescent current consumption. The TDA8954 is supplied with two diagnostic pins for monitoring the status of Thermal  Fold Back (TFB), Over Current Protection (OCP) and other protection circuits.

Features:

• „ High output power in typical applications:
• ‹ SE 2 × 210 W, RL = 4 Ω (VDD = 41 V; VSS = −41 V)
• ‹ SE 2 × 235 W, RL = 3 Ω (VDD = 39 V; VSS = −39 V)
• ‹ SE 2 × 150 W, RL = 6 Ω (VDD = 41 V; VSS = −41 V)
• ‹ BTL 1 × 420 W, RL = 8 Ω (VDD = 41 V; VSS = −41 V)
• „ Symmetrical operating supply voltage range from ±12.5 V to ±42.5 V
• „ Stereo full differential inputs, can be used as stereo SE or mono BTL amplifier
• „ Low noise
• „ Smooth pop noise-free start-up and switch off
• „ 2-pin diagnostics for protection circuits
• „ Fixed frequency internal or external clock
• „ High efficiency ≈93 %
• „ Zero dead time switching
• „ Low quiescent current
• „ Advanced protection strategy: voltage protection and output current limiting
• „ Thermal FoldBack (TFB) with disable functionality
• „ Fixed gain of 30 dB in SE and 36 dB in BTL applications
• „ Fully short-circuit proof across load
• „ BD modulation in BTL configuration
• „ Clock protection

Circuit Diagram:

Circuit Diagram 2 x 210 W audio power amplifier Class-D

Datasheet for TDA8954: Download

4x45W Stereo Power Amplifier Circuit Diagram TDA8596

General description:

The TDA8596 is a quad Bridge Tied Load (BTL) audio power amplifier with symmetrical inputs, made in BCDMOS technology. It contains four independent amplifier channels in BTL configuration with complementary (PMOST/NMOST) output stages. Temperature warning and output signal clipping diagnosis is possible via the I2C-bus and via the diagnostic pins (DIAG and STB pin). The temperature pre-warning level and clip detection levels can be programmed via the I2C-bus. The status of each amplifier channel (i.e. output offset, load connected or not, short circuit condition at the output pins) can be read out separately.

Features

• Operates in legacy mode (non I2C-bus) and I2C-bus mode (3.3 V and 5 V compliant)
• Three hardware-programmable I2C-bus addresses
• Drives 4 Ω or 2 Ω loads
• Balanced/symmetrical inputs
• Speaker fault detection
• Programmable gain (26 dB and 16 dB) also available in legacy mode
• Independent short circuit protection per channel
• Loss of ground and loss of VP safe (with 300 mΩ series impedance and a maximum supply decoupling capacitor of 2200 µF)
• All outputs are short-circuit proof to ground, supply voltage and across the load
• All pins are short circuit proof to ground
• Temperature-controlled gain reduction to prevent audio holes at high junction temperatures
• Low battery voltage detection
• Qualified in accordance with AEC-Q100

Circuit Diagram:

4x45W Stereo Power Amplifier Circuit Diagram TDA8596

Datasheet for TDA8596: Download

250 W Stereo Audio Amplifier Class-T

GENERAL DESCRIPTION:

The TA0103A is a 250W continuous average (4Ω ), two channel Amplifier Driver Module which uses Tripath’s proprietary Digital Power Processing (DPPT M ) technology. Class-T amplifiers offer bot h the audio fidelity of Class-AB and the power efficiency of Class-D amplifiers. 

Applications:

• Audio/Video 
• Amplifiers/Receivers 
• Pro-audio Amplifiers 
• Automobile Power Amplifiers 
• Subwoofer Amplifiers 
• Home/PC Speaker Systems

Circuit Amplifier:

250 W Stereo Audio Amplifier Class-T

200W Power Amplifier

Description:
The STA5150 is a fully integrated power module de-signed to implement a bash amplifier when used in conjuction with stabp01 digital processor
Circuit Diagram:

200W Power Amplifier  circuit diagram

Stereo 170W (4Ω) CLASS-T Digital Audio Amplifier

GENERAL DESCRIPTION 

The TA0102A is a 150W continuous average (4Ω ), two channel Amplifier Driver  Module which uses Tripath’s proprietary Digital Power Processing (DPPT M )  technology. Class-T amplifiers offe r both the audio fidelity of Class-AB and the power efficiency of Class-D amplifiers. 

Circuit Diagram

Stereo 170W (4Ω) CLASS-T Digital Audio Amplifier

50W Audio Power Amplifier

50W Audio Power Amplifier

Stereo 15W CLASS-T Digital Audio Amplifier

General Description:

The TA2024C is a 15W/ch continuous average two-channel Class-T Digital Audio Power Amplifier IC  using Tripath’s proprietary Digital Power Processing™ technology. Class-T amplifiers offer both the audio fidelity of Class-AB and the power efficiency of Class-D amplifiers. The TA2024C has incorporated specific changes to improve the click and pop performance over  previous devices such as TA2024 and TA2024B. The TA2024C is recommended for all new designs  that previously used the TA2024 or TA2024B.

Circuit Diagram:

Stereo 15W CLASS-T Digital Audio Amplifier

TDA8932B Class-D audio amplifier

General description

The TDA8932B is a high efficiency class-D amplifier with low power dissipation. The continuous time output power is 2 × 15 W in stereo half-bridge application (RL = 4 Ω) or 1 × 30 W in mono full-bridge application (RL = 8 Ω). Due to the low power dissipation the device can be used without any external heat sink when playing music. Due to the implementation of thermal foldback, even for high supply voltages and/or lower load impedances, the device continues to operate with considerable music output power without the need for an external heat sink. The device has two full-differential inputs driving two independent outputs. It can be used in a mono full-bridge configuration (BTL) or in a stereo half-bridge configuration (SE).

Features

Operating voltage from 10 V to 36 V asymmetrical or ±5 V to ±18 V symmetrical

Mono-bridged tied load (full-bridge) or stereo single-ended (half-bridge) application

Application without heat sink using thermally enhanced small outline package

High efficiency and low-power dissipation

Thermally protected and thermal foldback

Current limiting to avoid audio holes

Full short-circuit proof across load and to supply lines (using advanced current protection)

Switchable internal or external oscillator (master-slave setting)

No pop noise

Full-differential inputs

Applications

Flat panel television sets

Flat panel monitor sets

Multimedia systems

Wireless speakers

Mini and micro systems

Home sound sets

Circuit Diagram

Circuit diagram for TDA8932B 2 x 15W