TDA8920 2x100W class-D power amplifier

Description of TDA8920:

The TDA8920B is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 × 100 W. The device is available in the HSOP24 power package and in the DBS23P through-hole power package. The amplifier operates over a wide supply voltage range from ±12.5 V to ±30 V (±32 V non operating) and consumes a very low quiescent current. The TDA8920B is a two channel audio power amplifier using class-D technology. The audio input signal is converted into a digital pulse width modulated signal via an analog input stage and Pulse Width Modulation (PWM) modulator. To enable the output power transistors to be driven, this digital PWM signal is applied to a control and handshake block and driver circuits for both the high side and low side. In this way a level shift is performed from the low power digital PWM signal (at logic levels) to a high power PWM signal which switches between the main supply lines. A 2nd-order low-pass filter converts the PWM signal to an analog audio signal across the loudspeakers. The TDA8920B one-chip class-D amplifier contains high power D-MOS switches, drivers, timing and handshaking between the power switches and some control logic. For protection a temperature sensor and a maximum current detector are built-in. The two audio channels of the TDA8920B contain two PWM modulators, two analog feedback loops and two differential input stages. It also contains circuits common to both channels such as the oscillator, all reference sources, the mode functionality and a digital timing manager.

Features TDA8920:

• Zero dead time switching 
• Advanced current protection: output current limiting 
• Smooth start-up: no pop noise due to DC offset 
• High efficiency 
• Operating supply voltage from ±12.5 V to ±30 V 
• Low quiescent current 
• Usable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Tied Load (BTL) 
• Fixed gain of 30 dB in Single-Ended (SE) and 36 dB in Bridge-Tied Load (BTL) 
• High output power 
• High supply voltage ripple rejection 
• Internal switching frequency can be overruled by an external clock 
• Full short-circuit proof across load and to supply lines 
• Thermally protected

Applications:

• Television sets 
• Home-sound sets 
• Multimedia systems 
• All mains fed audio systems 
• Car audio (boosters)

Circuit diagram TDA8920:

TDA8920 2x100W class-D power amplifier

   

Datasheet for TDA8920: Download

Where you can buy: Aliexpress
Where you can buy: DealExtreme