Mini Portable Guitar Ampls

This small amplifier was intended to be used in conjunction with an electric guitar to do some low power monitoring, mainly for practice, either via an incorporated small loudspeaker or headphones.

The complete circuit, loudspeaker, batteries, input and output jacks can be encased in a small box having the dimensions of a packet of cigarettes, or it could be fitted also into a real packet of cigarettes like some ready-made units available on the market.

This design can be used in three different ways:

Mini Portable Guitar Amplifier

Max output power: 1.5W @ 9V supply - 8 Ohm load; 60mW @ 3V supply - 8 Ohm load

Frequency response: Flat from 20Hz to 20kHz

Total harmonic distortion @ 100mW output: 0.2%

Max input voltage @ 3V supply: 8mV RMS

Minimum input voltage for Fuzz-box operation: 18mV RMS @ 3V supply

Current consumption @ 400mW and 9V supply: 200mA

Current consumption @ 250mW and 9V supply: 150mA

Current consumption @ 60mW and 3V supply: 80mA

Quiescent current consumption: 6mA @ 9V, 4mA @ 3V supply

Fuzz-box current consumption: 3mA @ 3V supply

Guitar Amps

General Description

This design adopts a well established circuit topology for the power amplifier, using a single-rail supply of about 60V and capacitor-coupling for the speaker(s). The advantages for a guitar amplifier are the very simple circuitry, even for comparatively high power outputs, and a certain built-in degree of loudspeaker protection, due to capacitor C8, preventing the voltage supply to be conveyed into loudspeakers in case of output transistors' failure.

The preamp is powered by the same 60V rails as the power amplifier, allowing to implement a two-transistors gain-block capable of delivering about 20V RMS output. This provides a very high input overload capability.

Features:

Sensitivity:

• 35mV input for 40W 8 Ohm output
• 42mV input for 60W 4 Ohm output

Frequency response:

• 50Hz to 20KHz -0.5dB; -1.5dB @ 
• 40Hz; -3.5dB @ 30Hz Total harmonic distortion @ 1KHz and 8 Ohm load:
• Below 0.1% up to 10W; 0.2% @ 30W

Total harmonic distortion @ 10KHz and 8 Ohm load:

• Below 0.15% up to 10W; 0.3% @ 30W

Total harmonic distortion @ 1KHz and 4 Ohm load:

• Below 0.18% up to 10W; 0.4% @ 60W

Total harmonic distortion @ 10KHz and 4 Ohm load:

• Below 0.3% up to 10W; 0.6% @ 60W

Treble control:

• +9/-16dB @ 1KHz; +12/-24dB @ 10KHz

Brightness control:

• +6.5dB @ 500Hz; +7dB @ 1KHz; +8.5dB @ 10KHz

Bass control:

• -17.5dB @ 100Hz; -26dB @ 50Hz; -28dB @ 40Hz

Circuit Diagram:

Guitar Amps

Parts:

R1__________________6K8    1W Resistor
R2,R4_____________470R   1/4W Resistors
R3__________________2K   1/2W Trimmer Cermet
R5,R6_______________4K7  1/2W Resistors
R7________________220R   1/2W Resistor
R8__________________2K2  1/2W Resistor
R9_________________50K   1/2W Trimmer Cermet
R10________________68K   1/4W Resistor
R11,R12______________R47   4W Wirewound Resistors

C1,C2,C4,C5________47µF   63V Electrolytic Capacitors
C3________________100µF   25V Electrolytic Capacitor
C6_________________33pF   63V Ceramic Capacitor
C7_______________1000µF   50V Electrolytic Capacitor
C8_______________2200µF   63V Electrolytic Capacitor (See Notes)

D1_________________LED    Any type and color
D2________Diode bridge   200V 6A 

Q1,Q2____________BD139    80V 1.5A NPN Transistors
Q3_____________MJ11016   120V 30A NPN Darlington Transistor (See Notes)
Q4_____________MJ11015   120V 30A PNP Darlington Transistor (See Notes)

SW1_______________SPST Mains switch

F1__________________4A Fuse with socket

T1________________220V Primary, 48-50V Secondary 75 to 150VA
                  Mains transformer (See Notes)

PL1_______________Male Mains plug

SPKR______________One or more speakers wired in series or in parallel
                  Total resulting impedance: 8 or 4 Ohm
                  Minimum power handling: 75W

Speakers

So amplifiercircuit will try to do a definition of speakers, are one of the most common output devices used with computer systems. Speakers are transducers that convert electromagnetic waves into sound

waves. The speakers receive audio input from a device such as a computer or an audio receiver. This input may be either in analog or digital form. Analog speakers simply amplify the analog electromagnetic waves into sound waves. Since sound waves are produced in analog form, digital speakers must first convert the digital input to an analog signal, then generate the sound waves. The sound produced by speakers is defined by frequency and amplitude. The frequency determines how high or low the pitch of the sound is. For example, a soprano singer's voice produces high frequency sound waves, while a bass guitar or kick drum generates sounds in the low frequency range. Many speakers include multiple speaker cones for different frequency ranges, which helps produce more accurate sounds for each range. Two-way speakers typically have a tweeter and a mid-range speaker, while three-way speakers have a tweeter, mid-range speaker, and subwoofer.

Denon Subwoofers

Denon is a Japanese electronics company that was involved in the early stages of development of digital audio technology, while specializing in the manufacture of high-fidelity professional and consumer audio equipment. 

If you try to bay this brand, i will show a top review of this Denon Subwoofers.

www.bestbuy.com >  Rating: 4.6/5

www.amazon.com >  Rating: 4.3/5

www.trustedreviews.com > Rating: 8/10

www.digitaltrends.com > Rating: 8/10

So, is a good review. It’s not perfect, but Denon’s soundbar and sub deliver a big, weighty sound, backed up by decent connections, handy features and simple operation.

Subwoofer

What is a subwoofer? Is a dedicated low-frequency speaker cabinet, usually self-amplified, that fills in

Subwoofer

the deep, rich bass that is missing from most main speakers. Subwoofers are specialized, and don't reproduce midrange or high frequencies. Most main speakers are passive (unamplified).  Subwoofers usually handle frequencies below 150 Hz or so. 

A quality subwoofer not only reproduces the thrilling deep bass notes with authority. Its presence in the system also allows the receiver / amplifier to reproduce mid-bass and mid-range notes more cleanly. All kinds of instruments, including voices, can be heard more clearly. Why should you add at least one great subwoofer to your system? 

1. Deep bass adds the emotion, the physical feeling of presence and excitement, to a good music or movie performance! One reason that inexpensive speakers sound "just OK" is that they cannot reproduce deep bass very well. 

2. Subwoofers help solve problems in speaker set-up and placement. It's difficult to set the main speakers where they are able to provide realistic imaging, and set them in the best place for bass.  In-wall and in-ceiling speakers can be placed where they work best cosmetically, without concern for their bass reproducing ability, when the system has at least one great subwoofer. 

3. High-quality subwoofers are engineered to generate the massive cone movement required by low bass reproduction. A good subwoofer is specifically designed to generate deep bass. Whether you like jazz, classical, pop or rock, a good system can be made better with a good subwoofer.

Car Subwoofers

Car Subwoofers

Bazooka BTA6100 Subwoofer Enclosure Tube
Subwoofer enclosure tube gives vehicle owners an easy way to add a subwoofer to their audio setup. Like all subwoofers, the BTA6100 provides the bass, allowing listeners to scale back the bass on the other speakers, which means they can play them louder with less distortion.

Car for subwoofer

Universal Subwoofer Enclosure
The universal subwoofer enclosure provides the perfect box for a truck, fitting easily behind the vehicle seat. Otherwise, the box can also find use behind the back seat of a car. The Obcon Dual 12 offers a premium MDF build with a Tri-lock joint construction. It also utilizes the Labyrinth Power Port for greatly increased bass sound.








More design Car Subwoofers

Car Subwoofer

Car Subwoofer, for all people is a big gadget what love in your car. If you have a vehicle, the audio system is stronger bass sound that many audio enthusiasts desire. But subwoofers need more than a low-range speaker to perform well. The enclosures they sit in can play a huge part in the subwoofer's sound. help separate the sound waves generated by the rear of the diaphragm on the speaker from that produced at the front of the speaker. Otherwise, the two sounds would create distortion, echo, and reverberation, ruining the listening experience.

So in your car can put this design:

1. Design of car subwoofer with dual chamber.

This style is designed and built for deep bass performance. Offering a dual chamber and shared slot port vent design, 5/8-inch MDF construction, making for a durable speaker. Simple to setup and easy to use, the enclosure provides a sturdy box constructed of quality materials.

2. Design of car subwoofer with screwed down terminal cups

From the provider of superior performance and sound engineering in enclosures, offers a quality 12-inch hatchback enclosure. Completely carpet enclosed, the box has screwed down terminal cups and MDF construction. The enclosure also has 1-inch speaker baffles to help control vibrations and ensure that listeners only hear what the speaker puts out, making for a cleaner sound.

More design Car Subwoofers